IDICW01 RFID Full Duplicator

1) HD 2.9-inch color screen
2) ID/IC full hand and voice broadcast (in Chinese).
3) Support read write frequency: 125KHz, 250KHz, 500KHz, 375KHz, 625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz (ISO1443A/B), HID Prox cards.
4) Support read: EM4100/EM4200, Mifare classic, UID cards, Ultralight, Ntag203, HID 1386/1326/1346.
5) Support cards write: HID 1386/1326/1346, T5577, EM4305, Mifare UID cards.
6) Digital key input number can be directly inputted.
7) 4 AAA batteries supply or use with USB power supply.
8) Small and portable.
9) Please note that it can crack most but not all encryption cards.

How to copy the RFID cards

1. Press the "on/off "button.
2. Put the original 125khz cards on the back of the copier. The copier will be show the "Disclaimer" page. Press "ok"
3. Put the cards on the back side of the copier and press "scan"
4. The copier will scan and show the card number.
5. Put one writable T5577(125khz writable chip)/UID(13.56mhz writable chip) key on the back side of the copier and press "Write"

How to crack encryption 13.56Mhz cards

When the 13.56mhz cards have encrypted, it should be using the software to crack the cards.

Conneted the Device to computer via USB cable,

Power up the Device,

then the Device will be show the "Disclaimer"page,

NOT press any button on the Copier,

your computer will show a removeable disk,

open the disk,

there is the software,

please copy the software to your computer disk space,

Press the device's "OK" button to agree with the Disclaimer fistly,

open the software,

the device will connect the software successfully,

put your original cards on the back side of the Read/Write area,

then press the button "scan" to crack the passwords,

after 2 or 5 minutes,the passwords will be cracked successfully,

note : fail to decode also is the normal result,

then put one UID chip cards (13.56mhz writable type chip) in the read / write area,

then press"write"button,

that will be ok.